MC² Audio Expands Lightweight E Series Power Amps With E4-75
March 21, 2006
 |
| (Click for a close-up) |
UK-based amplifier manufacturer MC² Audio Ltd. is expanding its lightweight (switchmode) E Series with the introduction of the E4-75 power amplifier.
The E4-75 comes after 18 months of development and is designed for use in a wide variety of applications, including touring monitor racks. The E4-75 is a 4-channel amplifier capable of producing 750W RMS per channel into 4 or 8 ohms; it has automatic impedance sensing and changes the power accordingly.
Inputs are via four XLR sockets, which can be linked to the next channel via a rear panel switch providing greater flexibility to supply more speakers with the same input signal. Each channel has a separate Speakon output socket provided but channels C and D are also routed through the second set of pins on channels A and B Speakon outputs respectively. This gives the user the potential of running two separate bi-amped wedges from one amplifier, which could cut the number of monitor racks needed by 50%. The E4-75 has five-segment LED metering for each channel and an indicator to signal 4 or 8 ohm load. The E4-75 will also fit FOH applications running small-distributed systems or mid/hi sections of larger scale systems.
The E4-75 joins MC² Audio's E45, E25 and E15 amplifiers. The E45 offers 2250W/channel into 4 ohms (with peaks of 4500W/channel into 2 ohms; 1200W/channel into 8 ohms); the E25 is rated at 1250W/channel into 4 ohms; and the E15 is rated at 750W/channel into 4 ohms.
E Series units are housed in a 2U chassis. All MC² Audio products carry a full 5-year warranty. For more information, visit their web site at www.mc2-audio.co.uk.
| 
