Note: Be sure to check www.digidesign.com for complete details.

Pro Tools 5.0.1

Digidesign hardware requirements:

• Digidesign Pro Tools III PCI (Mac OS)
• Pro Tools|24 (Mac OS/Windows NT)
• Pro Tools|24MIX (Mac OS/Windows NT) systems

Minimum Macintosh requirements:

• Power Macintosh G4, Power Macintosh Blue & White G3, Power Macintosh Beige G3, Power Macintosh 9500 or 9600
• System Software: Mac OS v9.0 or v8.6
• Minimum RAM: 128 MB

Minimum Windows NT requirements:

• IBM IntelliStation M Pro model 6889, or other comparable system
• Processor: Intel Pentium III (450, 500, or 550 MHz) or Intel Pentium II (233, 266, 300, 350, 400, or 450 MHz)
• Motherboard : Intel 440LX or 440BX chipsets only, ATX form factor, with 2 adjacent PCI slots
• System Software: Windows NT Workstation v4.0 SP5
• Minimum RAM: 192 MB

Pro Tools 5.0.1 LE

Digidesign hardware requirements:

• Digidesign Digi001 (Mac OS; Windows 98 SE)
• Audiomedia III (Mac OS; Windows 98)

Minimum Macintosh requirements:

• Power Macintosh G4, Power Macintosh Blue & White G3, Power Macintosh Beige G3 (with certain performance limitations), Power Macintosh 9600 (200 MHz or higher)
• System Software: Mac OS v9.0 or v8.6
• Minimum RAM: 128 MB

Minimum Windows requirements:

• Processor: Pentium II 300 MHz or higher, Pentium III at any speed recommended
• System Software: Windows 98, Second Edition
• Minimum RAM: 128 MB, 192 or higher recommended
• CD-ROM drive for software install
• AGP or PCI graphic card

Next page: In Action