The Controller 2.0

INSTALLATION

1. unzip it to directory of your choice
2. move DELPHMID.DLL to WINDOWS\SYSTEM
3. add icon using program managers File-New
   program item

DESCRIPTION

This utility sends control change and pitch
bend messages to MIDI device when moving
mouse within grid. 

In order to record output to sequencer You should
link MIDI devices and sequencer together, using 
MULTIMID version 1.08 or higher. You can find
MULTIMID on the net in file MULTIMID.ZIP.

My setup :
Sequencer :  
    MIDI Input = Multi SB 16 MIDI In
    MIDI Output 1 = Multi Sound Blaster AWE
    MIDI Output 2 = Multi Yamaha SW60XG

This program: MIDI Output = Pipe SB16 MIDI In

This way You can record all MIDI messages from 
this program to sequencer.


CUSTOMIZATION

You can change control change names by editing
CTRLS.TXT. Current names of control changes
are for Yamaha XG line of synths. Don't delete
any lines, just edit or add names after CtrlChange 
number.


REGISTRATION

The Controller 2.0 is Demo. If you want all edit and
check boxes enabled, you can register by 
sending 15 $ and your e-mail address to address 
below. I will e-mail you your  username  and 
password immediately. 

                                  Vidmar Matjaz
                                  Pirjevceva 4
                                  5000 Nova Gorica
                                  Slovenia - SI

File is 199308 bytes long.

Download Times