Harmony Central Software

SynFactory 1.15

An interactive, modular software synthesizer.

FEATURES

* Fully modular, no fixed configuration. Free to route any signal to any module.
    All signals run at audio rate (44.1 Khz) therefore ultrafast LFO and Envelope modulation.
* Output scope
* Capture to wave-file

Available Modules:
* 4 types of Oscillators
* Multiple filters with 12, 18 and 24 dB/Oct slope and Lowpass, Hipass and Bandpass out.
    * Mixers and amplifiers
* Adders with 2 to 8 inputs, subtractor and ringmodulators
* all kinds of logic modules including AND, OR, XOR, NOT, FlipFlops, counters, switches and demultiplexers
* Delay lines and flanger/chorus effects
* 8 and 16 step analog style sequencers

Screen Shot

SYSTEM REQUIREMENTS

* A PC with Windows95/98/ME/NT4/2000/XP with a Pentium class processor and 32 Mb+ memory. For WindowsNT4/2000/XP more memory is recommended (64 Mb+)
* Soundcard capable of 16 bits stereo playback at 44.1 Khz
* A keyboard and a two button mouse


Changes from 1.14 to 1.15:
  - Can generate capture file in MP3 format (interface to lame_enc.dll).
  - Help pages removed from executable and put in seperate file (easier to
update).
  - Connect cables in patch editor by drag&drop
    (click on output, drag mouse and relase mouse button above an input).
  - 3 new colors available for patch cables.
  - New 3d-look for virtual pots and some other graphic cleanups
  - Added helppage which describes the menus
  - Uses doublebuffering to eliminate flashing of the audio scopes
  - Audio settings now moved to a new settings window with more options
  - Position of mainwindow is stored in autoload.syn
  - Basic support for MIDI input added: Control-Change messages and
monophonic notes.
  - New modules:
    - Added M-CC1 - Midi input for Control Change messages (Group1)
    - Added M-CC2 - Midi input for Control Change messages (Group2)
    - Added M-NOTE - Midi input for Note messages
    - Added JOYSTICK - Control upto 6 values at the same time with an
external joystick.
    - Added PANOUT - Output with panning and volume control (used for
mod-loading)
    - Added SCOPE - 4 channel scope

http://www.syntiac.com/synfactory.html

Download Software

File is 115051 bytes long.

Download Times

14.4k Modem28.8k Modem33.6k Modem56k Modem1-Channel ISDN2-Channel ISDNT1
1.1 minutesLess than a minuteLess than a minuteLess than a minuteLess than a minuteLess than a minuteLess than a minute

Back to Harmony Central® Windows Software

Comments? Suggestions?

E-mail: webmaster@harmony-central.com
Copyright © 1995-99 Harmony Central, Inc. All rights reserved.